EASY-TECH Placement Papers
EasyTech Placement Paper
1]. The following variable is available in file1.c
static int average_float;
all the functions in the file1.c can access the variable
[2]. extern int x;
Check the answer
[3]. Another Problem with
# define TRUE 0
some code
while(TRUE)
{
some code
}
This won't go into the loop as TRUE is defined as 0
[4]. A question in structures where the memebers are dd,mm,yy.
mm:dd:yy
09:07:97
[5]. Another structure question
1 Rajiv System Analyst
[6]. INFILE.DAT is copied to OUTFILE.DAT
[7]. A question with argc and argv .
Input will be
c:\TEMP.EXE Ramco Systems India
main()
{
int x=10,y=15;
x=x++;
y=++y;
printf("%d %d\n",x,y);
}
int x;
main()
{
int x=0;
{
int x=10;
x++;
change_value(x);
x++;
Modify_value();
printf("First output: %d\n",x);
}
x++;
change_value(x);
printf("Second Output : %d\n",x);
Modify_value();
printf("Third Output : %d\n",x);
}
Modify_value()
{
return (x+=10);
}
change_value()
{
return(x+=1);
}
main()
{
int x=20,y=35;
x = y++ + x++;
y = ++y + ++x;
printf("%d %d\n",x,y);
}
-----------------------------------------------------------------------
main()
{
char *p1="Name";
char *p2;
p2=(char *)malloc(20);
while(*p2++=*p1++);
printf("%s\n",p2);
}
----------------------------------------------------------------------
main()
{
int x=5;
printf("%d %d %d\n",x,x<<2,x>>2);
}
--------------------------------------------------------------------
#define swap1(a,b) a=a+b;b=a-b;a=a-b;
main()
{
int x=5,y=10;
swap1(x,y);
printf("%d %d\n",x,y);
swap2(x,y);
printf("%d %d\n",x,y);
}
int swap2(int a,int b)
{
int temp;
temp=a;
b=a;
a=temp;
return;
}
----------------------------------------------------------------------
main()
{
char *ptr = "Ramco Systems";
(*ptr)++;
printf("%s\n",ptr);
ptr++;
printf("%s\n",ptr);
}
---------------------------------------------------------------------
#include<stdio.h>
main()
{
char s1[]="Ramco";
char s2[]="Systems";
s1=s2;
printf("%s",s1);
}
-----------------------------------------------------------------
#include<stdio.h>
main()
{
char *p1;
char *p2;
p1=(char *) malloc(25);
p2=(char *) malloc(25);
strcpy(p1,"Ramco");
strcpy(p2,"Systems");
strcat(p1,p2);
printf("%s",p1);
}
*********************************************************************.
2)****SHOULD LEARN C++(this is very very IMP,Based
3)YOU SHOULD PREPARE ONE FEM PROJECT AND TELL THEM
THAT AS YOUR OWN WORK(This will increase chance
EASI-TECH
WRITTEN TEST PATTERN
--------------------
1] C TEST 10Q 20MINUITS
2]F E M TEST 19Q 20MINUITS
3]APTITUDE TEST 15Q 20MINUITS
-----------------------------
F E M TEST
----------
1)WHO USED THE TERM FINITE ELEMENT FOR THE FIRST TIME?
a)
b)
c) CLOUGH
2)DERIVE THE JACOBIEN |J| FOR BEAM ELEMENT WITH STRAIN
ENERGY?
(ANS:PROMLEM IS NOT CORRECT PLEASE DO NOT ATTEMPT)
3)FOR AN ELEMENT SIGMA Ni=1,WHICH TYPE OF ELEMENT IT IS?
a)
b)NATURAL CO-ORDINATE
(ANS 100% CORRECT)
4)TIMOSHENKO BEAM ELEMENT THEORY TO CONSIDER -- - - -?
a)
b)
c)SHEAR DEFORMATION
5)SHEAR LOCKING - - - - ?
(ANS IS VERY STIFF 'K')
6)MEMBRANE LOCKING
(ANS IS ARCH ELEMENT)
7)Ex(epsiolan x)=dU/dX,Ey=dV/dY,r(X,Y)=?(gama(x,y)=?)
(ANS IS dU/dY+dV/dX )
8)K=integral B(TRANSPOSE)*D*B FOR LARGE DEFORMATION
WHICH MATRIX WILL GET EFFECTED?
(ANS IS D matrix )100%correct
9)FOR PLANE STRAIN f(Ex,Ey,Ez,r(x,y) ) - - -
(ANS IS Ez=0)
10)SERENDIPITY ELEMENT IS
(ANS 8 NODED ELEMENT)
(The element which is having nodes only on boundary is
called SERENDIPITY element)
11)IF THE ROTATION OF ELEMENT AND THE DISPLACEMENT ABOUT
N-A IS SAME THEN THE ORDER OF CONTINUITY
(ANS IS C1)
12)FRONTAL THEORY IS APPLIED FOR
(Please refer any fem book)
13)MINDLINS THEORY IS APPLIED FOR
c) this is the answer(Both Co&C1problems)
14)X=SigmaNi*Xi,U=sigmaNi*Ui WHICH TYPE OF ELEMENT
(Refer book)
15)BEAM SUBJECTED TO UDL FIND THE MOMENTS AT THE 2 NODES
16)Integral B(Transpose)*sigma(here sigma means stress)*dV
REPRESENTS?
(ANS IS INTERNAL LOAD VECTOR)
17)Integral ET(epsiolan transpose)*sigma*dV
P=strain displacement vector
Q=stress-strain deformation
Find [K]
(ANS [K]=[P]T(p transpose)*[Q]*[P] )
18)
19)
REMEMBER ORDER MAY NOT BE CORRECT
APTITUDE TEST
1)33 1/3 of 101 + 296 is (ans 1200) check
2)0.625= ? (ans 27/40)
3)One ship goes along the stream direction 28 km and in opposite
direction 13 km in 5 hrs for each direction.What is the velocity
of stream? ` (ans 1.5 kmph)
4)Cubic root of 3375=? (ans 15)
5)2020201-565656=? (ans 1454545)
6)CHAIRS PROBLEM
5 chairs=9 tables,12 tables = 7 stools likethat- - -
7)One clock ringes 7 O'clock in 7 sec.In how many seconds it will
ring 10 O'clock. (ans 10.5 sec)
8)One watch is showing 30 past 3 .What is the angle between minutes &
hours hand?
9)The average of 4 consecutive even numbers is 27. What is the largest
number?
10) 25 stations ,24 stations are inbetween- - - - - how many tickets should
be required.
(ans 25*24=600)PUZZLES TO PUZZLE YOU "S.DEVI"PROB 24
11)One ball was dropped from 8ft height and every time it goes half
of the height. How much distance it will travell before coming to
rest. (ans 24 approximately)
12)Two trains are travelline at equilateral .Train A is travelling
in the direction of earths spin.Other train B is travelling in
opposite direction of earths spin.Which trains wheels will wear
first?and why? (ans TRAIN B .Because of less centrifugal force.)
OK HARI 3 MORE QUES ARE THERE.I HOPE YOU CAN SOLVE EASILY.
NOW I have only 3 C ques. I am sendins them in immediate
mail. Any whey I will try to send remaining 7 C ques
before 20th.
C QUESTIONS PROGRAMMS
1)
main()
{
char a[2];
*a[0]=7;
*a[1]=5;
printf("%d",&a[1]-a)
ANS:
ans may be 1.(illegal initialization)
2)
#include<stdio.h>
main(){
char a[]="hellow";
char *b="hellow";
char c[5]="hellow";
printf("%s %s %s ",a,b,c);
printf(" ",sizeof(a),sizeof(b),sizeof(c));
}
(ans is hellow,hellow,hellow
6,2,5 )
3)
#include<stdio.h>
main()
float value=10.00;
printf("%g %0.2g %0.4g %f",value,value,value,value)
}
(ans is 10,10,10,10.000000)
4)
#include<stdio.h>
void function1;
int i-value=100;
main()
{
i-value=50;
function1;
printf("i-value in the function=",i-value);
printf("i-value after the function=",i-value);
}
printf("i-value at the end of main=",i-value);
functioni()
i-value=25;
THIS IS ROUGH IDEA OF THE PROGRAM
ANS ARE
1)i-value in the function=25;
2)i-value after the function=50;
3)i-value at the end of the main=100;
5)
main()
{
funct(int n);
{
switch(n)
case1:
m=2;
break;
case2:
m=5;
break;
case3:
m=7;
break;
default:
m=0;
}
THIS IS ROUGH IDEA:
(ANS:Out put is m=0)
|
123
Eng